Available thicknesses on acrylic
Acrylic available on 8 standard substrates:
1/8, 3/16 , 1/4, 3/8, 1/2, 3/4, 1 & 1.5 inches.
> > > > >
THICK PIGMENTED COLORS
Colors available on substrates 1/8, 3/16 , 1/4, 3/8, & 1/2 inches.
Metallic Gold and Silver will have a smoked (darker) edge.
NOTE: Colors shown at samples, could have little variations versus the real color.
> > > > >
THICK COLORS
Colors available on substrates 3/4, 1 & 1.5 inches.
All colors are painted except Optical Clear, Green Glass & Translucent White.
NOTE: Colors shown at samples, could have little variations versus the real color.
STANDARD PAINT COLORS
Gemini's in-house paint lab can mix and match nearly any custom color needed.
Available in multiple paint sheen options: Gloss, Semi-Gloss, Satin or Matte.
NOTE: Colors shown at samples, could have little variations versus the real color.
Available thicknesses on METAL
Metal available on 6 standard substrates:
1/8, 1/4, 3/8, 1/2, 3/4, 1 inches.
> > > > >
ALUMINUM FINISHES
POLISHED AND ANODIZED FINISHES REQUIRE A MINIMUM .22" stroke.
(Stud mounts required) Restrictions may apply on letters & logos over 24".
The color of anodized letters will vary from order to order due the anodizing process.
NOTE: Colors shown at samples, could have little variations versus the real color.
STEEL FINISHES
POLISHED FINISHES REQUIRE A MINIMUM .5" stroke at 1/8" thick.
(Stud mounts required) Restrictions may apply on letters & logos over 24".
Alloy 304: The Standard 18/8" stainless, it's the most versatile and most widely used stainless steel.
Alloy 316: Offers better overall corrosion resistant properties than 304, particularly higher resistance to pitting and crevice corrosion in chloride environments.
Cor-Ten: An environment resistant steel, created by alloying copper, chromium and nickel cannot be painted or clear coated. It is not recommended for mounting on any surface that could be stained, due to bleeding of this rust layer.
NOTE: Colors shown at samples, could have little variations versus the real color.
BRASS FINISHES
POLISHED FINISHES REQUIRE A MINIMUM .5" stroke at 1/8" thick.
(Stud mounts required) Restrictions may apply on letters & logos over 24".
NOTE: Colors shown at samples, could have little variations versus the real color.
BRONZE FINISHES
POLISHED FINISHES REQUIRE A MINIMUM .5" stroke at 1/8" thick.
(Stud mounts required) Restrictions may apply on letters & logos over 24".
NOTE: Colors shown at samples, could have little variations versus the real color.
